- experimental serial reader support
- new config switch /debug/disable_pps to disable PPS for via and cryptoworks
- new config options for nagra cards without DT08
- sc_videoguard
smargo:
Zitat
1: Install the windows drivers
2: Open smartreader.exe
3: Plug the smartreader into a usb port
4: Select Autoswitch
5: Select Dreambox kernel
6: Make sure it returns with "writing settings successful"
7: Done
serial port smartcard readers:
Zitat
### serial port smartcard readers
# device node
#/sc/serial/<name>/device=<string>
#<>e.g.: /dev/ttyUSB0
# type
#/sc/serial/<name>/type=<string>><><><><>[default: phoenix]
#<>valid types: mastercrd2, phoenix, smartreader+
# clock frequency in Hz
#/sc/serial/<name>/fs=<num><><><><><>[default: 3571200]
z.b.
/sc/serial/usb0/device=/dev/ttyUSB0
/sc/serial/usb0/type=smartreader+
Zitat
* D: { AAAA BBBBBBBB { CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCC }}
*
* Compressed P and Q, DT06 with *** ID 0x0d, used to calculate N
* +++ only needed for cards without DT08 +++
* A = System Type
* B = Card Serial
* C = *** (24 bytes)
* N: { AAAA BBBBBBBB { CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCC }}
*
* RSA modulus used for session *** negotiation, equal to decrypted DT08; SK of Secondary ***
* +++ only needed for cards without DT08 +++
* A = System Type
* B = Card Serial
* C = Modulus (64 bytes)
Zitat
sc_videoguard:
* I: { AAAA BBBBBBBB { CCCCCCCC }}
*
* IRD serial number
* A = CA System ID
* B = Card Serial
* C = IRD Serial
» Author: tonytr dtd. 24.05.2009
» Size 1.62 MB; Needed time to download 3,177 Min with ISDN
» Total Hits: 1196
» Not rated yet
v.1.66 RC1
ALL cdks are new, due to server crash.. many many changes to libs etc.
Support for TNTSAT.
Experimental support for *** 0963. NB! Remember to put the 4 byte hex boxkey in config!
Multi-realms added to chameleon.
Support for pin-code on specific channels specified by <protectedsid> in config.
Added the ability to disable/enable certain virtualcards on chameleon in config, or disable whole list.
NB! NewCS has gone green - removed all support for windows
Time to grow up, get a powerfriendly little linux-device to run NewCS on!
» Author: tonytr dtd. 22.05.2009
» Size 7.44 MB; Needed time to download 16,944 Min with ISDN
» Total Hits: 5368
» Rating: 3 at 40 Votes
New in r2:
-it-locale update. Thx to Spaeleus
-de-locale fix: behundelt => behandelt
-fix crash: InfoBar toggleShow
-show ecm.info: give selection with all ecm.info files
-also pyc's now in ipk. should fix uninstallation of the plugin
» Author: tonytr dtd. 16.05.2009
» Size 57.03 kB; Needed time to download 7.3 Sec. with ISDN
» Total Hits: 1350
» Rating: 4 at 5 Votes
Watch Private Space for free :)
Follow this instruction:
Private_space for free
- download MPCS 1.0x-3 with Pandora support
- copy cws_xxx to your Dreambox (or other PPC device)
- run from console ./cws_xxx -p test
- apply following configuration in yor MPCS
mpcs.conf:
[newcamd]
Key = 0102030405060708091011121314
Port = 20000@0100:3d;20001@0500:21700;20002@0604:00
MPCS "premium"
MPCS 1.0 for x86, x86-64, PowerPC
+ Radegast client added
+ Pandora cache sharing server & client added
Let me explain what the Pandora protocol is.
MPCS server uses Pandora (UDP/encrypted) to share own cache to others.
If your friend configure Pandora server (and you client) you have possibility to watch the same channels as his clients (use other protocols as newcamd etc.). Pandora client sends no ECM to the server !
If I know there is few other programs with Pandora server support but it's not well known...
So from now MPCS support it, too
Regards.
» Author: tonytr dtd. 15.05.2009
» Size 0.42 MB; Needed time to download 54.73 Sec. with ISDN
» Total Hits: 3097
» Not rated yet
V0.82
- second try fixing caids tunneling (with PremiereHD card on betacrypt, i can't test it so, i don't know if it works or not)
- first try fixing caid 0603 (same as premierehd, i can't test it, please report if it works or not)
- fixed long ecm bugs
- full support for cccam 2.1.0 protocol
- many minor fixes for stability (hope this version will be better than last one)
» Author: tonytr dtd. 12.05.2009
» Size 0.41 MB; Needed time to download 53.43 Sec. with ISDN
» Total Hits: 797
» Not rated yet
________________________________________
- fix for Clients usage
- reverse DNS for server and user IP
- fixed bug in provider page
- workaround for 1802 provider that has too many ID
________________________________________
» Author: tonytr dtd. 28.04.2009
» Size 69.34 kB; Needed time to download 8.88 Sec. with ISDN
» Total Hits: 1893
» Not rated yet
- add color orange for local card on different box ( C-line with same Boxid and Dist 2)
- add CTRL+f for mbox.cfg and cwshare.cfg in editor ( focus to Find textbox )
- sort msms drop down alphabetically
» Author: tonytr dtd. 28.04.2009
» Size 1.14 MB; Needed time to download 2,118 Min with ISDN
» Total Hits: 1265
» Not rated yet
3.49
-fix iso T=0 handling
-add ssl support
-add socks support
-add usernames in ecm-server
-support card-, client-, server- based service filtering
-irdeto2-emu masterkey-update fix
-irdeto2-emu keyfile format change
-add pps for cryptoworks and viacess
-fix nagracard emm filter
mips & ppc
» Author: tonytr dtd. 25.04.2009
» Size 0.32 MB; Needed time to download 42.36 Sec. with ISDN
» Total Hits: 947
» Rating: 1 at 10 Votes
- fix bug copy right mouse click in Trace and Newcs windows.
- remove the message of stat.info if using older Mbox version or gbox (message only)
- local card count with DNS AND Boxid.
- add new ecm.info and pid.info (from mbox V0.5 build 0006)
- add new local card info.
- add Hide Double peers in main screen (same DNS and Boxid)
- add minimized to tray (enable/disable for each profile)
please backup your files BEFORE you use MCC !!!
» Author: tonytr dtd. 14.04.2009
» Size 1.05 MB; Needed time to download 2,118 Min with ISDN
» Total Hits: 1991
» Not rated yet
MBox Web Interface by cable_stork
Version: 1.0 BETA 2
Release date: 15 Mar 09
Supports MBox version: 0.4 BETA 023-4
Installation instructions:
1. Extract archive using: tar xvf mbox-wi-1.0b2.tar.gz
2. Place binary file in /var/bin or any other desired location
mbox-wi.x86 - linux pc
mbox-wi.ppc - dreambox (ppc)
3. Copy mbox-wi-templates directory (and contents)
to /var/etc/mbox-wi-templates/
4. Copy mbox-wi.cfg to /var/keys/mbox-wi.cfg
5. Change web server listen port in mbox-wi.cfg (or leave as default - 23000)
6. Execute the binary file
PLEASE MAKE A BACKUP OF YOUR CWSHARE.CFG AND
MBOX.CFG FILES BEFORE USING THIS PROGRAM
1.0b2 Changelog:
- Changed how CSS is served (to improve stability)
- Added provider ident info on peer info page
- Added total number of peers online/offline on peers page
- Added card stat counter to peers & peer info pages
- Now defaults to peers page
- Now allows mbox.cfg to be in other locations (fixed bug)
- Added 5 second cache for temporary files
- Reduced request poll time to 100ms (faster page loads)
- Prints debug messages to /tmp/mbox-wi.log (max filesize 100kb) -
this can be disabled with the '-d' flag
» Author: tonytr dtd. 16.03.2009
» Size 221.97 kB; Needed time to download 28.41 Sec. with ISDN
» Total Hits: 1019
» Not rated yet
Not Upload any Adult or Crack or Warez
Watching Pay Tv channels without a valid subscription is illegal , all files/information here are only for educational purposes only....
Last 50 Files
Search
Statistics
Home » Downloads » DVB CARDSHARING
Popular Files
