2007/12/19
v1.27
pw fix.
kathrein 1.04 image support including record and timeshift (new libioctl needed),
not tested on 1.03, known issue: switching audio tracks while recording damage recording,
ok in timeshift mode.
» Author: tonytr dtd. 20.12.2007
» Size 0.89 MB; Needed time to download 1,59 Min with ISDN
» Total Hits: 1623
» Rating: 1 at 10 Votes
2007/12/02
v1.26
kathrein support (stapi)
gbox client improvements, G:, Y: support, better card list handling,
virtual cards support for viaccess (can be used for tps) and N2.
tps and pw au fixes.
» Author: tonytr dtd. 02.12.2007
» Size 0.86 MB; Needed time to download 1,59 Min with ISDN
» Total Hits: 1433
» Rating: 2 at 15 Votes
MagicNewCs 2 - For Managment NewCs Program
Magic NewCs version 2 (New Editions)
Tool for Management NewCs server Programs for windows or lunix editions .
New Editions is Faster Than The Old One More Than 65% , Add New Futures, Computable With Newcs 1.5
Futures :
- Computable With Newcs 1.20 , 1.30 ,1.31, 1.5 .
- Use TCP to Connect Newcs server.
- Control Newcs from any where .
- Control Newcs users – stop, active, reset data, add new users with online mode.
- Reset users which are use more than IP address.
- Block users which are use specific Emulator.
- Block users which are connect from specific IP address.
- Determine users channels .
- Determine number of .
Ok Ecm , bad Ecm, Reject Ecm, Emm , Active Users
- Determine number of online users.
- Determine number of sockets users are use.
- Determine number of connections are open in specific duration .
- Determine max hits from Ip That Make Load To Newcs (prevent hack to server).
- Display Reader Info .
Status, Number Of Resets, Reader Nods
- Blockers.
Add or Remove Blocker to Share Address , Global Address , Unique Address - To block Update
- Sids.
Add or Remove Sids With Status (Allow, Deny) - to Stop or Active Channels
- Setting log's levels or type.
- Search through your log and Copy To Clipboard.
- Prelisted Newcs Commands .
Readers , Sids ,Blockers,version,Cache,Keys,Users,Uptime,Subs
- Sending Message To MagicCamd Clients.
- Reset Readers.
- Restart Newcs.
- Shutdown Newcs .
instillation :
To install the program to windows operating system Use Setup File, and you must be enable
in Newcs debugging mode by adding Following to newcs.xml file
, configuring your password and port number to which are use it to connect with Newcs
<debug>
<password>YourPassWord</password>
<level>normal</level>
<type>all</type>
<output>all</output>
<tcp_port>34534</tcp_port>
<tcp_options>normal,all</tcp_options>
</debug>
Configuration Attached File :
- Channels.txt
Format
channel name,sid,satname
like
ShowMovies 1,0131,NileSat
- Expire.txt
Format
Username,yyyy/mm/dd,Number Of User
like
User,2008/04/30,002
Please See Attached Pictures For More Deatils
» Author: tonytr dtd. 31.10.2007
» Size 2 MB; Needed time to download 4,236 Min with ISDN
» Total Hits: 2918
» Rating: 2.93 at 75 Votes
evocamd-2_17
Added new p2p newcs protokoll client.
Just ecm for the moment , use the newcamd login to emm your cards.
You have to start by creating your own self-signed Certificate, this can be done with this command on a machine that has openssl installed:
openssl req -new -x509 -nodes -out newcs.pem -keyout feynman.pem
or you can create a certificate on a online site, there is some that creates self-signed certificates.
Place it in /var/keys. Rework the feynman.cfg to your needs( user and pass how you added in newcs), place it in /var/keys and enjoy the new p2p proto.
example of feynman.cfg:
- feynman://duffy:[email protected]:12345
Some other improvements...
» Author: tonytr dtd. 28.10.2007
» Size 0.58 MB; Needed time to download 75.44 Sec. with ISDN
» Total Hits: 1473
» Rating: 4 at 5 Votes
newcs-1_50.zip
v.1.50
Fix to reconize newest NDS cards.
Added more functions to the WEB-console.
Fixed stats functions on WEB-console.
First betatest of Chameleon P2P-network (look at pt.1).
First release of Feynman opensource client-server protocol (look at pt.2).
Updated ezxml to latest version, it IS more sensitive for errors in xml (use a xml validator if needed).
Removed WEB-console from win32 (win32 is a limited version, without feynman, chameleon and web-console).
The Axis Eltrax SDK is sadly broken, support for this Arch will hopefully be back in the next release.
and
1.-- Chameleon - the newcs P2P ------- --- -- - - -
Here we will _try_ to make a little introduction on how the P2P network works.
You have to start by creating your own self-signed Certificate, this can be done with this command on a machine that has openssl installed:
openssl req -new -x509 -nodes -out newcs.pem -keyout newcs.pem
or you can create a certificate on a online site, there is some that creates self-signed certificates.
The connection from newcs<->newcs is encrypted with SSL.
After creating the certificate, place it somewhere and make sure the path in the <certificate> tag in the global section reflects that.
Go through the <chameleon> section, and set your port, create users if you need incomming connections, peers if you need outgoing connections.
If you want incomming connections, the tcp-port specified needs to be open in your router (NAT or similar).
When the server is started, it will generate a random 2byte hex serverID - this will be the ID of your server for this session, the other servers
in the network will locate you based on this ID _only_. Only your peers know your details, _noone_ else on the network know your details -to 3rd parties
the network is completely anonymous.
Clients have to connect to Chameleon through the Feynman server in NewCS, through here the client will send ECM to Chameleon. Chameleon will then
broadcast a ECM to all serverID's in the network that has this CAID/Provider, all that can, answer with a valid dcw. The 3 fastest replies will
be remembered, and Chameleon will continue now to send _only_ to the fastest replier. Chameleon will try to keep a timeing to the next fastest server
so it can switch when another one is faster.
For the moment, Mgcamd 1.2x can also get the chameleon cards through newcamd protocol IF the user it use to login has <cardlevel> set to 1.
If a client send more then 10 requests for a sid, and dont get a valid dcw - this client is blocked on this sid for another 100 requests to prevent
broadcast spamming.
2.-- Feynman Protocol ------- --- -- - - -
Feynman is a protocol written by us, it can handle multiple cards over one port, EMM, ECM - handle SIDS on both sides. It provides simple functions, so
client and server developers can think about other important stuff :)
We hope that this will be the new "standard" in the sat hobby - like newcamd has been in the past few years :)
Newcamd has been a great protocol, but it has its limitations - and we hope to phase out newcamd (and radegast) in the next major version of NewCS.
Would be nice if someone could make a sourceforge project, or some other opensource project site.
PLEASE, we give this as opensource, please keep it that way :)
Feedback is appriciated, hope someone will take this as a project to improve and nurse :)
» Author: tonytr dtd. 28.10.2007
» Size 5.44 MB; Needed time to download 11,649 Min with ISDN
» Total Hits: 5241
» Rating: 2 at 10 Votes
v.1.31
Added support for Nagra "3" (Rom 142 cards).
Brand spanking new Web-console (look at httpd section in default config).
Completely rewritten tcp-console.
Added manual ecm/emm sending.
Fixed timeing on ATR (should be alot faster for slow cards!).
Increased timeout on SCI commands, should fix some Big Conax EMM's.
Default config for x86&/i686 is now /etc/newcs.xml.
Fixed uptime should be correct on win32 now!
Added "advanced" mode for tcp-console - to hide possibly scary manual ecm/emm sending.
Fixed so it increase reset-counter on manual reset.
Fixes for some Irdeto cards in SCI.
Fixes to Irdeto EMM-AU code.
Fixed should now send Issuer Ident for Viaccess again.
» Author: eniss dtd. 28.09.2007
» Size 3.84 MB; Needed time to download 8,472 Min with ISDN
» Total Hits: 12327
» Rating: 2.57 at 35 Votes
mgcamd_1.24_tps_au_ok
unrar and send to omgcamd_1.24 to /var/bin
send mg_cfg to /var/keys
and restart mgcamd and wait france5 or any other channel same transponders
(not remember remove to old tps.au)
enjoy
» Author: tonytr dtd. 11.09.2007
» Size 156.54 kB; Needed time to download 20.04 Sec. with ISDN
» Total Hits: 1330
» Rating: 4.25 at 20 Votes
v.1.3 -Stable Release
Okay, first of all we want to apologise for the looong wait.. we have been working hard though, honest! :)
This is just a minor release though, was time for some bugfixes - and so you know that we're still alive!
Changes from previous release are too many to mention here (tbh. we have lost control over the changelog :p)
There have been alot of fixes, hopefully its bit more stable now then before..
Can also mention that we have added DGcrypt (wherever thats used..)
Also we have compiled support for the Kathrein box, even though it might not be quite useful (seems awfully buggy) :)
The big changes and features are planned for the next major release (v1.5 series)
» Author: tonytr dtd. 03.08.2007
» Size 2.86 MB; Needed time to download 6,354 Min with ISDN
» Total Hits: 2774
» Rating: 1 at 10 Votes
DVB-S Cards GBox Plugin. You need to have GBOX files (+gboxcontrol) And Of Course Some Peers. It's best work on AltDVB (For MyTheater You Need MDWrapper).
Fixed Problems on Polsat (And Other Nagra Packages)
+This is Now Useful
» Author: ozzymanborn dtd. 12.07.2007
» Size 42.96 kB; Needed time to download 5.5 Sec. with ISDN
» Total Hits: 8254
» Rating: 3.57 at 35 Votes
CCcam 2.0.1
-changed G: line syntax, see CCcam.cfg for details
-multiple G: lines on the same local port supported
-each G: line can have different localhost
-each G: line can have different pass
-sharing between G: lines supported
-nagra2 MECM
» Author: tonytr dtd. 09.07.2007
» Size 1.43 MB; Needed time to download 3,177 Min with ISDN
» Total Hits: 2147
» Rating: 1 at 10 Votes
Not Upload any Adult or Crack or Warez
Watching Pay Tv channels without a valid subscription is illegal , all files/information here are only for educational purposes only....
Last 50 Files
Search
Statistics
Home » Downloads » DVB CARDSHARING
Popular Files
