These modifications generate a block line specific to your peers to filter "OLD" and "FAKE" cards to be added to the C: Lines in CCcam.cfg.
Instructions for use:
---------------------
1.) Click the newly added "Filter" button in CCcamInfoPHP.
2.) A page will appear with a box containing a pre-formatted line.
3.) Select and copy this line and insert into CCcam.cfg at the end of every C: Line
Example:
If a C: Line is C: friend.dyn!dns.org 12000 user pass no and the block line generated is ,500:20a10,500:20a20,500:20a30,d02:8c,d03:c0,d03:c4 the C: Line becomes C: friend.dyn!dns.org 12000 user pass no
Installation:
-------------
1.) Locate the directory for CCcamInfoPHP containing config.php. This is usually %programfilesCCcamInfoPHPhtdocs.
2.) Back up the file meniu.php by renaming it.
3.) Copy the modified meniu.php and filter.php to the same folder.
If you have CCcamInfoPHP running on other than the default host:port of 127.0.0.1:4001, you will have to make appropriate changes to $url in filter.php.
Enjoy!
» Author: tonytr dtd. 14.08.2009
» Size 3.42 kB; Needed time to download 0.44 Sec. with ISDN
» Total Hits: 1492
» Rating: 1.2 at 50 Votes
* solved once for all bugs with spaces and comments in config files
* fixed a bug on caid tunneling
* fixed a bug when a cw with same old value arrives
* added web interface (the config writer could have some bugs,
it is not 100% tested)
* added log of ecm pid selected
* added timeout check on server connection (no more blocking if a fail
server is given)
* fixed a check on multi*istances
* added on_screen_messages_ecm and on_screen_messages_emm
(emm are disabled, so now is useless), pay attention, it will pop*up
a message on the screen each time an ecm decrypted successfully arrives
* if no more protocol or priority type will be selected (check_priority,
cs_protocol_order) nothing will be used by default, check the config
file for more examples and infos
* added possibility to set priority/ignore on ecm pid (check the
incubusCamd.prio file for more infos/examples)
* fixed a bug with emu given by cccam protocol servers
* fixed a bug on reading keys from SoftCam.Key file (also added possibility
to use char ; or # for comments)
* now all emulators codifies should be ok, i can't test them all, so report if
something is wrong (do not forget to use the SoftCam.Key edited
like the one attached in the release pack, because it's not like others
softcam.key files)
* fixed a bug on reading config files, wich do not delete spaces ' ' when found
No EMMs are supported yet, so do not hope in that, emms will be implemented in a future version.
» Author: tonytr dtd. 11.08.2009
» Size 0.61 MB; Needed time to download 79.45 Sec. with ISDN
» Total Hits: 990
» Not rated yet
10/08/2009, V0.91
- fixed a bug on caid tunneling
- fixed a bug when a cw with same old value arrives
- added web interface (the config writer could have some bugs, it is not 100% tested)
- added log of ecm pid selected
- added timeout check on server connection (no more blocking if a fail server is given)
- fixed a check on multi-istances
- added on_screen_messages_ecm and on_screen_messages_emm (emm are disabled, so now is useless), pay attention,
it will pop-up a message on the screen each time an ecm decrypted successfully arrives
- if no more protocol or priority type will be selected (check_priority, cs_protocol_order) nothing will be used by default,
check the config file for more examples and infos
- added possibility to set priority/ignore on ecm pid (check the incubusCamd.prio file for more infos/examples)
- fixed a bug with emu given by cccam protocol servers
- fixed a bug on reading keys from SoftCam.Key file (also added possibility to use char ; or # for comments)
- now all emulators codifies should be ok, i can't test them all, so report if something is wrong (do not forget to use the SoftCam.Key edited
like the one attached in the release pack, because it's not like others softcam.key files)
- fixed a bug on reading config files, wich do not delete spaces ' ' when found
No EMMs are supported yet, so do not hope in that, emms will be implemented in a future version
» Author: BIGMAN_58 dtd. 10.08.2009
» Size 0.61 MB; Needed time to download 80.38 Sec. with ISDN
» Total Hits: 1088
» Not rated yet
05/08/2009, V0.90
- fixed the bug for caid/provider selection for protocols
- optimized a little bit more the protocol selection (lot of improvements)
- added console server interface (you can log by telnet, check the config file: console_logs_broadcast, console_logs_broadcast_port)
- added more infos for current server and info like that, in file /tmp/ecm.info
» Author: BIGMAN_58 dtd. 06.08.2009
» Size 0.54 MB; Needed time to download 71.14 Sec. with ISDN
» Total Hits: 1248
» Not rated yet
WARNING: config file is changed a bit, now is less difficult and many features
are added but not completed yet
- added camd33 protocol
- added camd35 protocol
- added possibility to define .prio and SoftCam.Key file directories
- added a check on multi istances of running incubusCamd to prevent errors (i read that many people start many times
the cam and this will crash connections to servers)
- fixed cccam 2.1.2 support for check on protocol version
- now you can set priority for each provider/caid combination, by selecting if you prefer the cam will check firstly
internal emulator, card share protocol or internal card reader (not yet implemented the card reader function, it-s a future plan)
check the "check_priority" option in the config file
- now you can set card share protocol priority, check the "cs_protocol_order" option in the config file
- changed a bit the configuration file to allow you to set all protocols data inside the [Servers] section, check the config file to know more
» Author: BIGMAN_58 dtd. 06.08.2009
» Size 0.45 MB; Needed time to download 59.58 Sec. with ISDN
» Total Hits: 702
» Not rated yet
- 0.99.4:
- videoguard BoxID can be specified in the config file
- support of the viaccess nano d2 (assuming you have the correct
AES key in the config)
- add support for 10MHz readers
- extend uniq configuration option to check multi-user on
the same IP
- Change timeouts from seconds to milliseconds
- wait for local cards on oscam startup before opening network ports
(see WaitForCards config option)
- Try decoding first on local cards
- add CMake build system
- use our own AES functions if target don't have them (at compile time)
- added patch for TVN ECM
- increase maxtuntab
- setup UnLockParental for viaccess too
- Add logging of CW in files for offline decrypting.
» Author: tonytr dtd. 25.07.2009
» Size 1.62 MB; Needed time to download 3,177 Min with ISDN
» Total Hits: 1715
» Rating: 1.33 at 15 Votes
v.1.67 RC1
Added support for the Synology devices on the Marvell ARM platform.
Added support for the Coolstream STB. (PS! NO Sci support.. yet)
Added support for the Azbox STB and devices on the Sigma MIPS platform. (PS! NO Sci support.. yet)
ALOT of PC/SC fixes, prefer these devices with the ccid driver over phoenixes.
Misc. phoenix fixes.
HTB+ Viaccess fix.
Added support for the new viasat cards (we think, no feedback on tests).
PS!
You _HAVE_ to use boxkey manually on certain *** cards now.
» Author: tonytr dtd. 14.07.2009
» Size 10.2 MB; Needed time to download 22,1298 Min with ISDN
» Total Hits: 10524
» Rating: 3.33 at 15 Votes
- Added Messages. From now you can send (receive) messages to (from) your peers who is using Mbox Manager (other aplications are not compatible). If the sent message is not received in 15 days, the message will be lost
- NewCS Log fix for older .Net Framework
- More C lines error fixed
» Author: tonytr dtd. 10.07.2009
» Size 0.47 MB; Needed time to download 62.03 Sec. with ISDN
» Total Hits: 1054
» Not rated yet
- deleted old priority system for caid, now will be used firstly the prio and then a cycle selection
- SID in hex value instead of dec one
- fixed some bugs on caid ecm parsing
- fixes for stability/less-crashes (crashes were made by the pmt handling, using pmt file wich the writes is slower than the channel change,
now should be fixed in almost all cases)
- still open the 2.1.1 protocol support and previous version
- fixed a bug on reading **** for the internal emulator, now also unsupported softcam.key files are skipped in the unknown fields
(read the softcam.key file to see how to build a new one)
» Author: tonytr dtd. 18.06.2009
» Size 0.43 MB; Needed time to download 56.38 Sec. with ISDN
» Total Hits: 517
» Not rated yet
Mbox 0.6 BETA build 00002
=======================
Changed Z line in mbox.cfg! Added flag to disable writing debug text in console window.
-Fixed problem with connections.
-Removed TCP code/connection.
-Protocol Version number is 01.0C.
-Removed connection to old 0.5 mbox versions
» Author: tonytr dtd. 08.06.2009
» Size 1.02 MB; Needed time to download 2,118 Min with ISDN
» Total Hits: 1565
» Not rated yet
thsi is beta test not officia versionl!!!!
what new in 1.0.6:
- spider user 10,20,30 (same lie 1,2,3)
- newcamd client detection
- support OSD massages...(login in NewCS "osd username text")
- dvb client for dreambox
- *** improment, also auto detect boxid
- improved filter and Load Balance
- many bug fix
Not Upload any Adult or Crack or Warez
Watching Pay Tv channels without a valid subscription is illegal , all files/information here are only for educational purposes only....
Last 50 Files
Search
Statistics
Home » Downloads » DVB CARDSHARING
Popular Files
