Nabilo v8 Mod lonas v4 mbox 023.4.r - Sbox

As I have already requested some compys to the issue of the card and update here I bring the same image but with mod canvas v4 sbox card set to put ash veneer down,
Remember that you must add sbox's serial sbox.conf card on file in HEX.

Flaswizard loaded without problems but I am recommending that you have DreamUp the forum to load these images.

New Bootlogo boot.
Only 18% occupied at / var (recieninstalada, then with some other plugin I am at 30%).
New Default Skin modified for Mbox04 Rihana_NET (includes d1 and d2 on the screen).
Optimization of the image completely, eliminating all that is in use.
Emus installed Mbox04 (023.4.r) and sbox (ready to put the card under the plate and rular pa).
Installed scripts: Borrafakes of the compilation Borraoffs cthulhufhtagn + plugin.
Added in / var / keys / ident.info and ignore.list updated date.
The Emus ... were installed in the / (root)
Routes of Emus changed and now are / bin / mbox and / bin / sbox (mbox eye to configure the control center and remember this).
Line C cwshare preconfigured with your Dlin just to add to this (do not substitute your own, just add your Dlin and delete the ones you are, remember to leave the C line to read the card and add your provider)
to operate the standby remember stamdby.sh scrpt modify and replace where it says your password dreambox for your dream or not work if you changed the password if nothing changes nothing changes.
The image is optimized for virtual or local Mbox, you only have to put his list of channels and enjoy it.
Mbox Center Plugin to view stats, color, card, etc ... (Click yellow button to access this)
The default is only Mbox so you'll have to go to the blue button and select the command mbox + sbox for you to read your card
The image is pre-configured to read a card from the earth Ash if you want to read another changes the providers for yours on the line C and it also adds 50000.list coresponda the keys in the folder edit the lines by the corresponding G your providers.
This image is a respected around the web interface which is not to remove anything from 100 per 100 Nabil.
restarted one at 4:20 and 4:45 in the morning alone in standby sets (remember to put your password to the script) if you want to change this by accessing the nabcron.dat in / var / etc / and edit it or from the remote and blue button blue button again.
Fixed a few bugs that had previous versions of Nabil v8 this is much more stable than the v3 and has even so much nonsense.
startscript.sh script is added to loq ue boot every time you boot or start Reboot the dream that you metais loq ue to within the same script, it currently only has introduced borrafakes borraoff and which by a sleep of 3600 seconds (one hour) begin to function in this way we keep the dream start to crash any more because they do not start at the same peace that emus, we have given a time range between the start of the emus and the script not to get hung and let the mbox make your function hello and little things.

This image does not bring any more only the script and borrafakes borraoff of time so that I have seen no problems share.onl is happening a lot lately,

Remember to update the ident.info and ignore.list by that of the thread specific to this forum,
do not know if I forget something else but if I remember I'll put it on the fly ....

remember that the settings for the Mbox Control Center now is this:

Nombre de archivo: mbox
direccion ip: la tuya jeje
Ruta Mbox: /bin
Ruta Keys: /var/keys
Ruta Temp: /tmp
Ruta Mbox cfg: /var/keys/mbox.cfg

» Author: Ricky dtd. 15.11.2012
» Size 4.49 MB; Needed time to download 9,531 Min with ISDN
» Total Hits: 2678

Current Rating: 1.43
Total votes: 35

• Please vote only once for a file
• Do not use the best or worst strictly