
*******************************
**** SNITCH NAGRA AUTORROL ****
****     40 + 48 + 70      ****
*****                     *****
******                   ******
*****                     *****
****          2.0          ****
****                       ****
****        Buid 23        ****
*****                     *****
******                   ******
*******                 *******
*******************************


SNITCH is a MDAPI (MultiDec API) Plug-In for EMM interpretation and operational key retrieval.


Please follow the instructions below carefully.


To be used on an existing installation of ProgDVB (>= 3.92), Multidec 9, HispaDVB 6.x
or CATT (>=0.21) with Yankse. FAUST should not be present!

1 - Backup SoftCam.key (and all other .key files you may have on the program directory).

2 - Remove all .key files from the program directory but LEAVE A COPY of SoftCam.key.

3 - Make sure your SoftCam.key contains lines for Via Digit@l, Pols@t and Tv C@bo providers.
    If not already present, add them manually (with zeros).

    Something like this:

N 4001 00 0000000000000000
N 4001 01 0000000000000000

N 4801 00 0000000000000000
N 4801 01 0000000000000000

N 7001 00 0000000000000000
N 7001 01 0000000000000000


4 - Place all included files/folders in program plugins directory (or, if the program does not have
    a plugins directory, the program directory itself).

5 - Start the program and tune into a Tv C@bo, Via Digit@l or Pols@t channel. If your existing 
    keys are not up-to-date, no image should be available yet.

6 - On the SNITCH menu, select "EMM->PID-><provider you are tunning to>" and then
    "EMM->Find Keys"

7 - Wait for Keys to be found (less than 1 min - depends of the provider). If running MD,
    there will be an OSD indication when the process starts and finds a new key.

8 - You can leave "Find Keys" running. If you do, new keys will be found even faster and at
    virtually no CPU cost. However, You if you change provider and wish to switch "EMM->PID->" option,
    you will have to turn "Find Keys" off first.



Notes:

 - Write EMM Cache: New option that writes the content of the EMM Cache to an ATR-TXT formated file.
                    Tune a channel, activate "Find Keys" and leave it running for a while (even after
                    it has found the keys). When you select this option the created file will contain
                    all the EMMs received since "Find Keys" was activated.


 - Soft-CI:         Soft-CI 5.x for Multidec9 Locks the SoftCam.key file during operation. Therefore
                    Snitch is not compatible with it.

 - Support:         No support whatsoever. Bug reports and suggestions are welcome though...


Changes from V2Beta3:
 - Added Vi@ new EMM PID.
 - New directory structure: All card emulation files go to a sub-directory.
 - Removed hard-coded VK for 4801 and 4001

changes from V2Beta2:
 - PolSAT working. EMM PID switch (sat change) is always manual.
 - RBGH register emulation added.
 - Card crash control added.

changes from V2Beta1:
 - Path for all files (including LOG) is now the plugins directory!!
 - Emulation thread timings re-tuned for v2 algorithm. Should be a bit faster.
 - Preparation for P*lSat started. Will be available next release.
 - Other minor code fixes.



Credits:
 - SNITCH was written by AlphaAXP@bigfoot.com
 - The Card's internal CPU Emulator (ST7) was written by Josillo.



Disclamer:
Watching Pay-TV channels you dont have a subscription for is a felony!
This software does not change that. You should only use it if you are a legitimate subscriber.

